Publicidad
Idiomas disponibles
Idiomas disponibles
Note：Figure 1, Figure 2 only as a product space demand size schematic diagram
.
Recommendation combination:
The following combination of drawers, baskets, and shelves is recommended for energy to
be used as efficiently as possible by the refrigeration unit.
Leveling the fridge
If the fridge is not level, the door and magnetic seal alignment will
be affected and may cause you fridge to work incorrectly. Once
the fridge is placed in its final location, adjust the leveling feet at
the front by turning them.
Unobstructed ventilation shall be maintained around the appliance or in an
embedded structure.
Cleaning before use
Wipe the inside of the fridge with a weak solution of bicarbonate of soda. Then rinse with
warm water using a damp sponge or cloth. Wash the baskets and shelves in warm soapy
water and dry completely before replacing in the fridge.
Before plugging in
Check that you have a socket which is compatible with the plug supplied with the fridge.
DO NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE FRIDGE.
The coolant fluid needs time to settle. If the appliance is switched off at any time, wait 1
hour before switching back on to allow the coolant fluid to settle.
Before filling your fridge
Before storing foods in your fridge, turn the fridge on and wait for 4 hours, to make sure it
is working properly and to allow the fridge to fail to the correct temperature.
If the refrigerator is installed in the moisture place, make sure to check whether the
ground wire and leakage circuit breaker are normal. If vibration noises are produced due to
the refrigerator contacting the wall or if the wall gets blackened by air convection around
27
Publicidad
