Cherubini BLUE WAVE RX Serie Instrucciones página 26

ADJUSTMENT OF THE LIMIT SWITCHES
During adjustment the motor will advance with a short movement and then a pause
followed by a continuous movement in the desired direction. The limit switch may be
adjusted regardless of the fact that the motor is mounted in a box awning or square bar.
It is possible to choose whether to set the upper limit or the lower limit first.
The correct rotation direction will only be identified after the first position is set so it is
sometimes necessary to use the "up" or "down" button.
EXAMPLE N.1
Setting first the closing position
If the awning is completely close, you have first to drive it down by around
20 cm.
Bring the awning to the closing position using the UP or DOWN button.
Follow the command sequence given in order to save the closing position. At the end of
the sequence, the motor carries out a short "down" movement which confirms that the
settings have been saved.
UP
?
DOWN
Pressing now the DOWN button, drive completely down the awning to the opening
position.
Follow the command sequence given in order to save the opening position. At the end
of the sequence, the motor carries out a short "up" movement which confirms that the
settings have been saved.
SETTING THE CLOSING POSITION
SETTING THE OPENING POSITION
UP UP
DOWN DOWN
26
UP
confirm
DOWN
confirm