boso medicus smart Manual Del Usuario página 54

Preparing to measure your blood pressure
2-3 cm
EN
Do not attach the cuff over wounds as
this can cause further injuries.
Ensure that the cuff is not attached to
an arm where arteries or veins are under-
going or have undergone medical treat-
ment (e.g. shunt).
For women who have had a breast
amputated, do not attach the cuff to the
arm on the amputated side of the body.
54
Marking
Artery
Illustration 3
During the measurement, medical ap-
paratus that are being used on the same
arm at the same time, may malfunction.
The cuff must not be too tight. There
1
should be enough space to fit roughly two
fingers between arm and cuff.
The metal ring should never lie over
the artery (see illustration 3) as this may
produce a false reading.
¬ Grasp the end of the cuff that feeds
though the metal ring and wrap it
around the outside of your arm. Attach
the Velcro fastener by applying gentle
pressure.