Preparing to measure your blood pressure
¬ Place your arm with the cuff attached
on the table, holding it relaxed and
slightly bent so that the cuff is level
with your heart.
Do not talk during the measure-
ment.
Check that the air tube is not kinked
during the measurement. This could cause
congestion of the blood flow and sub-
sequent injury.
should not prevent the flow of blood for an
unnecessary length of time (> 2 minutes).
If the monitor fails to function correctly, re-
move the cuff from the arm.
cause injury by restricting blood flow.
too low values
correct values
pervised children.
too high values
Illustration 4
This can lead to accidents or damage.
ting on the cuff.
a choking hazard if swallowed by mistake
by infants.
The blood pressure measurement
Excessive frequent measurements can
The device may not be used by unsu-
Do not use the device near infants.
Do not start the device without put-
There are small parts that may cause
EN
55