Winix ZERO+ Manual De Uso página 9

INITIAL OPERATION
Insert the unit plug into an electrical outlet.
①
ˍ The Control Panel lights will turn on and
off.
Press the 'Power' button.
②
ˍ During the first 4 minutes of power up, the Air Quality light
Note
By default, when the unit first powers on, the
③
mode will be set to Auto with PlasmaWave
enabled.
ˍ When in Auto Mode the fan speed will
be automatically adjusted according to
the environments air quality.
ˍ PlasmaWave ® works to remove harmful
airborne contaminants.
ˍ In Auto mode, as the indoor air quality improves, the fan
Note
ˍ When the unit is running, you may hear a chirping or buzzing
English
will flash as the Smart Sensors measure the air quality in the
environment, after which normal operation will begin.
®
speed will automatically be reduced to Low.
sound. The sound is from large particles passing through
®
PlasmaWave , it is normal and does not signify product
failure. To disable PlasmaWave ® , see page 11.
ZERO+ WiFi
9