Publicidad
Idiomas disponibles
Idiomas disponibles
2 - INTRODUCTION TO THE PRODUCT
2.1 - Product description
8
5
4
The motorised front beam consists of the following sub-assemblies:
1- 24V transformer unit
2- Motor unit
3- Control unit
4- Guide pulley with tensioner unit
1
2
4
6
The rear telescopic beam consists of the following sub-assemblies:
1- Thrustbearing column
2- "L" thrustbearing bracket
3- Runner
4- Round belt guide
2.2 - Technical specifications
Power supply
Rated power
Electric lock voltage
Battery charger
Electric motor
Recommended max. weight for panel
Opening speed
Closing speed
Opening pause time
Operating temperature
Protection rating
Crosspiece length
Fuse 1 power line
Auxiliary battery power supply fuse
Accessories power outlet
Use in highly acid, saline or explosive atmosphere
2.3 - Wiring table
It is advisable to run the cables to the far right, looking at the automation box, with a cable excess of approximately 3 m.
Power supply 230V
Control inputs
Inputs
OPEN CLOSE
START STOP
6
5- Mechanical limit switch
6- Runner
7- Right side cap
8- Left side cap
3
5
7
5- Round belt guide with belt tensioner
6- Fixed belt lock
7- Connecting bracket between the panels with movable belt lock
Max length [m]
3
Max length [m]
30
3
230 Vac (+/- 10%) 50/60 Hz
130 W
12 Vdc, 5 W
27.6 Vdc max, I max = 350 mA max during charging
24 Vdc max power 80 VA
1+1 leaf 100+100 Kg; 2+2 leaves 70+70 + 70+70Kg
Adjustable max 80 cm/s (for leaf in weight class "0")
Adjustable max 50 cm/s (for leaf in weight class "0")
Adjustable from 0 to 60 seconds
from -20°C to +55°C
IP 22
max 7 m
15A blade fuse type AL
15A blade fuse type AL
28V max, with 500mA max
NO
H05VV-F 3G1 mm²
PVC LiYY 5x0.34mm²
7
2
1
Cable type
Cable type
EN
43
Publicidad
