MIYOTA GP03 Manual Del Usuario página 5

5.Setting Instructions
(1) Setting the date (Quick change function)
Pull the crown out to the first click position and set the date by rotating the crown
backyard.
If the date is set beween 11:00 PM and 3:00 AM, the date will not change correctly.
(2) Setting the normal time
Pull the crown out to the second click position when the second hand reaches the
12 o'clock position so that the second hand stops there.
Then set the hour and minute hands.
When setting the minute hand, put it 4 to 5 minutes earlier than the time to be set,
and then turn it back to the correct time.
Note: The day is changed during the period from about 0:00 AM to about 5:30 AM.
After the time is set, push the crown back simultaneously with the time signal.
The second hand will start running at the same time.
This specifications might be changed without prior notice.