Publicidad
Idiomas disponibles
Idiomas disponibles
EN
2 - INTRODUCING THE PRODUCT
2.1 - Description of the control unit
The CT10224 control unit is the most modern, efficient system for
the control of Key Automation motors for the electric opening and
closure of sliding gates, up-and-over doors and electromechanical
barrier.
1
4
2.2 - Description of the connections
1- Motor power supply connections and encoder
2- Transformer power supply connections
3- 24Vdc and 24Vac output connections to controls and safety devices
4- Connector for battery charger KBP
5- Limit switch connector
6- Functions display
7- Safety device dip switch
8- Fuse 2A slow-acting
9- STOP-PH2-PH1-OPEN-CLOSE-PAR-SBS safety led and led input led
10- Limit switch indicator LED LSC
2.3 - Models and technical characteristics
CODE
DESCRIPTION
900CT10224
24V control unit for sliding gates, up-and-over doors or electromechanical barrier
- Power supply with protection against short-circuits inside the
control unit, on motors and on the connected accessories.
- Obstacle detection.
- Automatic learning of working times.
20
8
2
All other, improper, use of the control unit is forbidden. The CT10224
has a display allowing easy programming and constant monitoring
of the input status; the menu structure also allows easy setting of
working times and operating modes.
5
6
17
14
10 11
7
13
12
9
3
11- Limit switch indicator LED LSO
12- STEPPING SBS button
13- UP + button
14- MENU button
15- DOWN - button
16- Antenna
17- KEY led
- Safety device deactivation by means of dip switches: there is no
need to bridge the terminals of safety devices which are not installed
- the function is simply disabled by means of a dip switch.
16
15
Publicidad
