Publicidad
Idiomas disponibles
Idiomas disponibles
4.3 Assembly of transport handles
First fix the handlebars (7-8) with fasteners as described in the image below.
Now fix the upper blockers (9) with their fasteners and spring (6). Finally, install
the front plate (10) in the holes that remain inside the handlebars. In image B you
can see the result of the assembled elements.
NOTE: The handlebars go up freely and will be locked at the top. To unlock
and lower them, raise them slightly first and then rotate the handlebars inwards as
in image C.
1. Install the rear handlebar (1) according to image B. This handlebar will
allow the movement of the equipment between two people.
48
Publicidad
