Publicidad
Idiomas disponibles
Idiomas disponibles
2. Under the oil drain hole, place a suitable container to collect the drained
gasoline.
3. Using a screwdriver unscrew the carburettor drain screw (A), the gasoline
will start to flow through the carburettor drain hole (B). Once all gasoline is
drained, retighten the drain screw.
4. Remove the spark plug (see chapter 9.3) and put directly into the cylinder, a
teaspoon of clean engine oil (10 ~ 20ml). Smoothly, pull the starter rope of
the engine, which will turn the engine and distribute the oil. Then, put back
the spark plug
5. Slowly, pull the starter rope until you feel resistance. At this point, the piston
is rising in its compression stroke and the admission and exhaust valves
are closed. In this position, moisture cannot enter in the motor, which
provides protection against internal corrosion.
75
Publicidad
