Publicidad
Idiomas disponibles
Idiomas disponibles
5.5 Remote control stopping
On the remote control, press the "OFF" button.
NOTE: If you will not use the generator in the next 12 hours, so close the fuel
valve and turn the key to the "OFF" position. This action avoids the battery
discharge during periods of inactivity.
5.6 Synchronize a new remote-control device
NOTE: To sync a second remote control — without cancelling an existing one
— follow steps 1 to 5, but skip step 3. Note that only two remote controls can be
synchronized at the same time.
NOTE: To sync a new remote — cancelling the old one — follow steps 1 to 5,
including step 3.
1. Turn the key to the "ON" position.
2. Press the "PILOT LAMP" button for more than 3 seconds until the blue light
on.
3. Press the "STOP" button on the remote control for more than 1 second and
the blue "PILOT LAMP" will flash.
4. Press the "START" button on the remote control for more than 1 second
and the blue "PILOT LAMP" will flash.
5. Press the "PILOT LAMP" button and hold it until the light turn off, and with
this the new remote control will be synchronized.
57
Publicidad
