Publicidad
Idiomas disponibles
Idiomas disponibles
Securing Child in Child
Restraint (continued)
1
- Listen for clicks. Pull on buckle
to verify it is latched.
2
- Snap the chest clip together
and temporarily slide towards
buckle for tightening of harness.
3
- Tighten harness by pulling
on the adjustment strap. Pull
any excess harness webbing
through the buckle towards the
child's shoulders and pull on
the adjustment strap. This may
need to be repeated several
times for proper fit.
Verify that the harness is snug
around the child's waist and
shoulders.
4
- Position the chest clip at child's
armpit level.
Check that Child is Secure
Buckle is fastened.
Harness straps are not twisted.
Harness is snug – A snug
harness cannot be pinched
horizontally, and should not
allow any slack.
Chest clip is level with armpits.
(continued on the next page)
34
PIPA rx instructions
1
click
2
click
3
4
PIPA rx instructions
35
Publicidad
