BRAND Transferpette S-8 Instrucciones De Manejo página 51

5. Dispensing a sample
b.
c.
Transferpette® S-8/-12 997208
a. Place the pipette tip against the ves-
a.
b. Press the pipetting knob at a steady
c. Completely empty the tip by over-
d. While doing this, wipe the pipette tip
e. Remove the pipette tip from the ves-
Do not lay the instrument down when
the tip is filled; this can cause the
medium to flow into the instrument and
contaminate it! The instrument should
always be stored in the provided shelf
mount or table stand and kept in an up-
right position, without any tip inserted.
sel wall. Hold the pipette at an angle
of 30-45° to the vessel wall.
speed until it stops and hold it down.
To improve accuracy, comply with
the corresponding wait time for
serums, highly-viscous or low-density
media.
stroking: Press the pipetting button
as far as it will go.
against the vessel wall.
sel wall and allow the pipetting but-
ton to move back to its original posi-
tion.
NOTICE
Operating manual
51