UTC Fire & Security interlogix SB Serie Manual De Instalación página 10

Terminal Description
4 "−" Heating
5 NO intrusion relay
6 COM intrusion relay
7 NO disqualification relay
8 COM disqualification relay
9 A column synchronization [1]
10 B column synchronization [1]
[1] See "Installing modules in columns" on page 17.
DIP switch settings
Table 2: DIP switch 1 to 2 - channel selection
Switch 1 Switch 2
OFF OFF
ON OFF
OFF ON
ON ON
See "Channel selection" on page 13 for more details.
Table 3: DIP switch 3 to 5 - operating modes
Switch 3 Switch 4
OFF OFF
OFF OFF
OFF ON
OFF ON
ON OFF
ON OFF
ON ON
ON ON
See "Operating modes" on page 14 for more details.
10
Function
Channel 1
Channel 2
Channel 3
Channel 4
Switch 5 Function
ON Single module in "AND" mode
OFF Single module in "OR" mode
OFF "Slave" mode with low beam enabled
ON "Slave" mode with low beam disabled
OFF "Master" mode with the mono detection column
ON "Master" mode with double detection column
OFF Not used
ON Not used
SB Series AIR Beam Detectors Installation Manual