Ducson MATCH 121 Instrucciones De Operación página 41

POWER MANAGEMENT
To prolong the life of the generator and attached devi-
ces, it is important to take care when adding electrical
loads to the generator. There should be nothing
connected to the generator outlets before starting its
engine. The correct and safe way to manage generator
power is to sequentially add loads as follows:
1. With nothing connected to the generator, start the
engine as described later in this manual.
2. Plug in and turn on the first load, preferably the
largest load you have.
3. Permit the generator output to stabilize (engine runs
smoothly and attached device operates properly).
4. Plug in and turn on the next load.
5. Again, permit the generator to stabilize.
www.ducsonpower.com
6. Repeat steps 4 and 5 for each additional load.
Never add more loads than the generator capacity.
Take special care to consider surge loads in generator
capacity as previously described.
NOTICE:
Do not overload the generator's capacity. Exceeding
the generator's wattage/amperage capacity may
damage the generator and/or electrical devices
connected to it.
Pag: 12