Publicidad
Idiomas disponibles
Idiomas disponibles
12-2. Tub clean Load detection setup
Tub clean load detection setup can be used to enable/disable the ability to detect laundry load in
the tub during tub clean. If enabled, the washer will detect whether or not a load is present in the
washer.
Enter setup mode.
You will see LqC1
Press the Hot button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Display
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press Warm or Cold button and then select
Press the Start button.
The machine sets up load detection function, then
advances to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
.
or
.
Disable
Enable
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the Hot button three times.
PROGRAMMING MODE - SETUP MODE
Button
Display
appears
appears
appears
One or the other
will display.
43
Publicidad
