31. How to set auto dosing
can be used to set the duration of auto dosage for each channel.
Enter setup mode.
You will see LqC1
Press the Hot button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Display auto dosing channel (CH1~5).
Press the Start button.
Display previous dosing time (sec).
Press Warm or Cold button to select time between 0
and 20(Except CH3)
CH3 can select time between 0 and 10.
Press the Start button.
Display next auto dosing channel. (until CH5)
The machine sets up the dosing time.
Press the Hot button,
then press the Cold button to advance to the next
process.
CH
Detergent
Pre-wash
➀
Main wash
➁
Bleach
➂
Softener
➃
NOTE
• CH5 is not used in this machine.
Input period
Pre-wash phase
Main wash phase
Main wash (Remaining washing time : 5
Minutes)
Final rinse phase
PROGRAMMING MODE - SETUP MODE
Button
Display
appears
appears
➀
➃
➁
➂
63