Publicidad
Idiomas disponibles
Idiomas disponibles
19. Rinsing time setup
Rinsing time setup can be used to set the time for each rinse.
Enter setup mode.
You will see LqC1
Press the Hot button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press the Warm or the Cold button until
in the display.
Press the Start button. Display
Press Warm or Cold button to select course.
: Hot course
: Warm course
: Cold course
: Delicates course
: None (only for Heater model)
Press the Start button.
Display previous rinsing time.
Press Warm(+) or Cold(-) button to select rinse cycle.
(Max 16min, Min 8min)
Press the Start button.
The machine sets up the rinsing time, then advances to
the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the Hot button three times.
PROGRAMMING MODE - SETUP MODE
Button
.
Display
appears
appears
51
Publicidad
