Publicidad
Idiomas disponibles
Idiomas disponibles
Vacuum packaging with the bottle stopper (not supplied)
1. Insert the bottle stopper into the neck of the bottle.
•
Leave at least 2.5 cm between the contents and the rim.
2. Insert one end of the hose (not supplied) into the hose port on the side of
the appliance.
3. Insert the other end of the hose into the hole on top of the bottle stopper.
4. Close the lid and press down on both corners or the lid to lock until you hear
the click sound.
5. Press
to vacuum seal the bottle.
•
The seal and vacuum indicator lights will illuminate during vacuum
sealing.
•
To stop vacuum sealing, you can press
6. When the indicator lights go out, the vacuum sealing is complete.
7. Remove the hose.
8. To remove the bottle stopper, twist and pull up on it to release the vacuum.
Food Preservation Guidelines
The charts below are used as a guide only.
The storage life will depend on the original quality of the food and whether a
correct seal has been made.
To take out the food, pull
up the cover slightly to
release the air and then
open the container cover.
.
41
Publicidad
