Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING AND MAINTENANCE
• Warning: Always unplug the appliance before cleaning.
• Do not immerse the appliance or power cord in water.
• Wipe the outer surfaces of the appliance with a soft damp cloth.
• To clean the inside of the appliance, wipe away any food or liquid
with a paper towel.
Dry the entire appliance with a dry cloth before replacing.
Do not use chemical cleaners or abrasives product for cleaning.
NOTE: The foam gaskets around the vacuum chamber should be dried
thoroughly before re-assembling. Assemble carefully and ensure the
foam gaskets are in their original position to ensure proper operation.
The appliance is not working:
1. Check the power cord to see if it is firmly plugged into a power outlet.
2. Examin the power cord for any damage.
The appliance does not start to seal after vacuuming:
1. Check the bag is not broken or leaking.
2. Check the sealing strip and the gaskets for debris and correct positioning.
Make sure there is no breakage or distortion. Wipe clean and secure them
back into place.
3. Check the sealing strip and gaskets are not deformed.
Air has entered into the bag after being sealed:
1. There may be leaks along the seal caused by wrinkles, debris crumbs, grease
or liquids. Open the bag, wipe along the sealing area on the inside of the
bag and smooth it out along the sealing strip before re-sealing.
2. Check the bag for a puncture or hole which may have released the vacuum
seal. Do not vacuum seal hard items with sharp points (like bones or shards
of nut shell).
Ratings: 220-240V~, 50Hz
TROUBLESHOOTING
SPECIFICATIONS
140W
43
Publicidad
