Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Display Introduction
Press the red button to turn on the display. You can select the desired function by pressing the
red button. Refer to the right upper corner of the display for functions.
TIME
DISTANCE
COUNT
TOTAL COUNT
CALS
IMPORTANT: The calculation of calories burned is an estimation and should not be
considered medically reliable. We suggest consulting your doctor or dietician to
adapt your diet and energy consumption depending on your physical condition, and
the sporting activities you intend to be involved in. We also recommend that you
consult your doctor prior to beginning any new exercise.
Remarks
The functions change automatically after a couple of seconds so that during your
session you can keep track of the time, distance, number of exercises and the total
estimated calorie consumption. If you prefer one particular function, then press the
red button till you have found the desired function and "SCAN" is off the display.
The display will automatically switch on when you start exercising or when you press
the red button.
The display will automatically switch off when a few minutes have passed and no
action has been detected.
Installing and replacing the battery
Remove the mechanism from the display by disconnecting it from its slot. The
battery compartment is situated behind the counter. Install or replace a 1.5V AAA
battery(NOT PROVIDED). Re-assemble the display.
Attention
How to assemble the pedal:
Total time pedaled.
Total distance pedaled, in meters.
Total movement times during the workout session.
Total movement times during different sessions.
This value cannot be reset unless you replace the battery
Total calories burned.
Make sure the pedal is is perpendicular to the pedal arm
when assembly. Afterwards, slowly screw the position
marked with the red circle into the pedal arm.
Publicidad
