Rumble Tuff BREEZE Manual Del Usuario página 9

4. Start-up Procedure and Operation
3
4
5
14
If desired, place the Silicone Cushion
into the Flange of the Breastshield.
Note: Your Electric Breast Pump will work
with or without the Silicone Cushion. The
usage of the cushion is entirely optional and
based on your comfort and preference.
Insert the Flange into the Breastshield
Body.
Place the Diaphragm in the Cup of the
Breastshield Body.
Note: Do not reverse the order of steps 4
through 5. Doing so will result in suction
loss when pumping.
Press around
the edges of the
Diaphragm for a
secure fit.
Place the Cap on the Cup and
Diaphragm.
Align the hinge
cover over the hinge.
Press tightly on the
cap to seal.
4. Start-up Procedure and Operation
Connect the Tubing to the Tubing
6
Connector located on the Cap.
Note: Make sure there is no moisture in the
Tubing.
To Convert Your Double Pump Into a Single Pump:
Remove one tube and close the cap.
1 2
Disconnect the tube Cap the opening of the
from the Tubing Splitter Tubing Splitter
on the side with the
little Cap
Note: Using the pump after converting from Single to Double or Double to Single may result in a temporary lack of
suction or over-suction respectively. Please use caution and adjust the pump to your comfortable and effective level.
4.3 Operating Breeze
1
3
Ready to use as a single
pump.
1. Open the dust-proof cover and plug
in the tubing adapter.
2
2. Make sure the
Tubing Adapter is
properly inserted
into the Vacuum
Inlet on the Electric
Pump Main Unit.
15