Publicidad
Idiomas disponibles
Idiomas disponibles
30 | English
Starting Operation
Switching On and Off
To switch on the inspection camera, press the ON/OFF button (6) or the centre
button (9).
Note: If the camera cable is not fitted when switching on, the display will show an error
message.
To switch off the inspection camera, press the ON/OFF button (6) until the display
switches off.
If no button on the inspection camera is pressed for a certain time, then the inspection
camera will automatically switch itself off to preserve battery life. You can set the switch-
off time in the main menu.
Regulating the illumination light in the camera head
To regulate the light, press the left-hand button (8) or the right-hand button (11) until it
reaches the required brightness or the illumination light has switched off.
Do not look directly into the light (3) and do not direct the light onto other
u
people. The light can blind your eyes.
Zooming In/Out of the Image in the Display
To set the magnification level of the display view, press the up button (7) or the down
button (10) until the required magnification level has been reached.
Main Menu
To access the <Main menu>, press the centre button (9).
Navigating in the menu
– To scroll through a menu: Press the up (7) or down (10) buttons.
– To switch to a submenu: Press the centre button (9) or the right-hand button (11).
– To confirm a selected menu option: Press the centre button (9).
– To switch a function with a virtual switch on or off
button (9), the right-hand button (11) or the left-hand button (8). This will also save
the setting.
– To return to the previous, higher-level menu: Briefly press the ON/OFF button (6).
– To exit the main menu and return to the camera display: Briefly press the ON/OFF
button (6).
1 609 92A 8H6 | (07.03.2023)
: Either press the centre
Bosch Power Tools
Publicidad
