emmeti X-ONE Serie Manual De Instalacion Y Uso página 41

U I S
3.1 Periodic Maintenance
The air conditioner you have bought has been designed
to keep maintenance operations to a minimum, which only
External cleaning
Before any cleaning and maintenance operation,
disconnect the unit from the mains by switching off
the main switch.
Wait until the parts have cooled down to avoid getting
burned.
Cleaning filtering seats
The air conditioner you have bought has been designed
to keep maintenance operations to a minimum, which only
concern the following cleaning operations:
- Clean the air filter after a period of continuous use and
in accordance with the concentration of impurities in
the air, or when you wish to start-up the appliance
after a period of inactivity.
The filter is placed on the top part of the appliance.
1
3
2
MAINTENANCE
concern the following cleaning operations.
Do not use abrasive sponges or abrasive or corrosive
detergents to avoid damaging varnished surfaces.
When necessary, clean the external surfaces with a soft
damp cloth.
To extract the filters:
- open the grid and remove it;
- extract the filters by lifting them;
- remove the dust from the filter with a vacuum cleaner
or washing it in running water without using detergents
or solvents and leave to dry;
- put the filters back on top of the batteries, taking care
to position them correctly;
- put the grid back.
Check that the panel is mounted correctly after
cleaning operations.
Using the appliance without the net filters is prohibited
MAINTENANCE
EN
41