2.4/ Manual single station start
If you wish to stop watering before the programmed time is completed, press the
The blinking stream disappears.
Note : Water Budget does not operate in the manual single station mode.
2.5/ Manual cycle start
watering time for the station is counted down. The rest of the stations will appear in sequence.
Use the
key to selet the desired station.
Then press the
screen by a blinking sprinkler stream. The display counts down the
remaining programmed watering time in 1-minute increments. It
corresponds to the watering time set in step 1.3.
A cycle consists of the sequential operation of all stations assigned
to the same program. Use the
press the
key to start the cycle. The sprinkler stream will blink.
The 1st station number in the program appears and the remaining
key. Watering starts and is indicated on the
key to select the program. Then
29
key.