Publicidad
Idiomas disponibles
Idiomas disponibles
FEATURE DETAILS - VDV500-163 DIGITAL TONER-PRO
T15 T15
T4 T4
T1 T1
T2 T2
T5 T5
T3 T3
T13 T13 T13
T6 T6
T7 T7
T9 T9
To ensure safe operations and service of the instruments, follow these instructions.
To ensure safe operations and service of the instruments, follow these instructions.
To ensure safe operations and service of the instruments, follow these instructions.
Failure to observe these warnings can result in re, electric shock, severe injury or death.
Failure to observe these warnings can result in re, electric shock, severe injury or death.
The Digital Toner-Pro, test leads, and Digital Probe-Pro, are designed for use on extra-low
The Digital Toner-Pro, test leads, and Digital Probe-Pro, are designed for use on extra-low
The Digital Toner-Pro, test leads, and Digital Probe-Pro, are designed for use on extra-low
The Digital Toner-Pro, test leads, and Digital Probe-Pro, are designed for use on extra-low
The Digital Toner-Pro, test leads, and Digital Probe-Pro, are designed for use on extra-low
The Digital Toner-Pro, test leads, and Digital Probe-Pro, are designed for use on extra-low
The Digital Toner-Pro, test leads, and Digital Probe-Pro, are designed for use on extra-low
The Digital Toner-Pro, test leads, and Digital Probe-Pro, are designed for use on extra-low
The Digital Toner-Pro, test leads, and Digital Probe-Pro, are designed for use on extra-low
The Digital Toner-Pro, test leads, and Digital Probe-Pro, are designed for use on extra-low
The Digital Toner-Pro, test leads, and Digital Probe-Pro, are designed for use on extra-low
•
voltage cabling systems (less than 60V) for testing when
voltage cabling systems (less than 60V) for testing when
The maximum voltage across ABN Test Clips of the Digital Toner-Pro is 60V in Test
The maximum voltage across ABN Test Clips of the Digital Toner-Pro is 60V in Test
The maximum voltage across ABN Test Clips of the Digital Toner-Pro is 60V in Test
•
mode, and 20V in Continuity mode. Connecting the Digital Probe-Pro to live mains AC
mode, and 20V in Continuity mode. Connecting the Digital Probe-Pro to live mains AC
mode, and 20V in Continuity mode. Connecting the Digital Probe-Pro to live mains AC
mode, and 20V in Continuity mode. Connecting the Digital Probe-Pro to live mains AC
power may damage it and pose a safety hazard for the user.
power may damage it and pose a safety hazard for the user.
DO NOT use instruments if they are wet, as it could pose a shock hazard.
DO NOT use instruments if they are wet, as it could pose a shock hazard.
DO NOT
•
DO NOT use instruments if they are damaged in any way.
DO NOT use instruments if they are damaged in any way.
DO NOT
•
Turn off instruments and disconnect all ABN Test Clips before attempting to replace batteries.
•
The battery door must be in place and secure before you operate the instrument.
•
DO NOT open the case, other than the battery compartment.
DO NOT
DO NOT open the case, other than the battery compartment.
•
T14 T14
T20 T20 T20
T21 T21 T21
WARNINGS
T1 T1 TEST MODE Indicator
T2 T2 "NRM" (Normal)
Polarity Indicator
T3 T3 "REV" (Reverse)
Polarity Indicator
T4 T4 "CONT" (Continuity)
Indicator
T5 T5 TONE MODE
Indicator
T6 T6 Analog Tone
Frequency Indicators
T7 T7 Digital/Analog Tone
Button
T8 T8 Mode button
T9 T9 Power On/Off Button
T10
T10 Pin/Pair Selection
Button
T11
T11 Battery Status
Indicator
T18 T18 T18
T12
T12 Lanyard Slot
T13 Digital Tone Indicator
T13
T14
T14 Red ABN (Angled
T19 T19 T19
Bed-of-Nails) Test Clip
T15
T15 Black ABN (Angled
T10 T10 T10
Bed-of-Nails) Test Clip
T16 Battery Cover
T16
T8 T8
T17
T17 Battery Cover Screw
T11 T11 T11
T18 Wire Map Indicator
T18
T19
T19 Shield Indicator
T20 Test Lead Inputs
T21 RJ45 Port
NOT
NOT
NOT energized.
NOT
NOT
NOT
energized.
energized.
energized.
3
Publicidad
