1. Remove the oil gauge from the tube.
2. Examine the oil level. Make sure that the oil level is
between "add" and "full".
To clean the oil cooler
Check and clean oil cooler fins at a 100 hour interval.
1. Use a brush or compressed air to clean the oil cooler
fins from dirt.
To change the oil
WARNING:
injury. Make sure the engine is warm, not
hot, before you remove the oil.
WARNING:
Make sure that you obey national
regulations when you dispose the engine oil.
Note:
Put a container beneath the oil filter before you
remove the oil filter.
Change the oil every 100 hours of operation.
22
A
Hot engine oil can cause
Engine oil is poisonous.
1. Operate the product to make sure that the engine oil
is warm.
2. Make sure that the product is on a flat surface.
3. Stop the product.
4. Remove the oil drain plug (A) and drain the oil into a
container while the engine is warm.
A
5. Attach the oil drain plug.
6. Fill the engine with oil and examine the oil level
To change the oil filter
WARNING:
injury. Make sure the engine is cool before
you remove the oil filter.
WARNING:
Make sure that you obey national
regulations when you dispose the engine oil.
Note:
Put a container beneath the oil filter before you
remove the oil filter.
Change the oil filter each 200 hours of operation.
1. Drain the engine oil into a container.
Hot engine oil can cause
Engine oil is poisonous.
2023 - 003 - 04.04.2023