Publicidad
Idiomas disponibles
Idiomas disponibles
B
Using the appliance
Installing your new appliance
Before using the electrical appliance for the first time, please consider the following tips.
Ventilation of the appliance
WARNING :
To improve the efficiency of the refrigeration system and
save energy, it is necessary to maintain good ventilation
around the appliance for heat dissipation. For this reason,
there should be sufficient empty space around the
refrigerator. It is advisable to have a clearance of 50-70 mm
from the back of the wall, at least 100 mm from the top and
at least 100 mm from the side of the wall and a clearance at
the front to allow the doors to open to 135°. Please see the
following diagrams.
50-70
100
PLEASE NOTE :
This electric appliance performs well in the climate classes
from N to T shown in the table below. It may not function
properly if exposed to a temperature below or above the
range indicated below for a long period of time.
100
100
135
940
6
EN
B
Using the appliance
Climatic class
SN
N
ST
T
• Place your device in a dry place to avoid excessive moisture.
• Keep your device away from sunlight, rain and frost. Keep your device away from heat sources
such as ovens, fires and heaters.
A
Levelling the electric appliance
• For levelling and sufficient air circulation in the lower rear section of the appliance, the feet
may need to be adjusted.
• You can adjust them manually by hand or by using an appropriate spanner.
• To allow the door to close automatically, tilt the top back 10mm.
B
Installing a door handle
Remove the handle and screws from the bag, remove the protective films from the handle, position
the handle on the right side of the door, attach it with screws and install the handle screw covers.
Room temperature
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
7
EN
Publicidad
