EdilKamin FANTASY Instalación Uso Y Mantenimiento página 37

authorised by Edilkamin (CAT) prior to ignition and testing
This standard indicates the control operations to be carried out
in situ, aimed at ascertaining correct system function.
Before igniting.
Edilkamin technical service centre (CAT), (for information
see the www.edilkamin.com website) to calibrate the stove
according to the type of pellets used and installation conditions,
thereby starting the guarantee.
Failure to have the stove ignited by an authorised C.A.T. pre-
vents Edilkamin from guaranteeing correct functioning.
that installation is correct
the power supply
that the door closes properly to a perfect seal
that the combustion chamber is clean
that the display is on standby (the date, power or temperature
FILLING THE PELLET HOPPER
system. Simply apply slight pressure to the front part of the
ATTENTION:
ning and therefore is hot.
NOTE regarding the fuel.
with 6 mm diameter.
from compacted sawdust, compressed under high pressure
with no adhesives or foreign materials.
will render the warranty null and void. Such use is detected by
grammed their stoves to guarantee the best performance when
pellets with the following characteristics are used:
INSTRUCTIONS FOR USE
-
-
- 37
must be recalibrated a similar procedure to that carried out by
malfunctions; stop the stove from functioning due to clogging,
dirt on the glass, unburnt fuel, etc.
smooth, uniform length, not very dusty.
-