Dräger X-zone 5000 Instrucciones De Uso página 47

4.2.10 Alternative key commands
Forming a new group
A maximum of 15 group devices can be assigned to a main
device. Group affiliation is saved in the corresponding X-
zone 5000 until the group is terminated.
1. Gather all the devices for the group in one area.
2. Switch on the devices (see "Switching on the instrument"
on page 38).
3. Select an X-zone 5000 as the main device.
4. Press key on the main device briefly.
X-zone becomes main device.

Search run for the group devices is started.

Grouping LED main device: red-green flashing slowly.

Grouping LED for potential group devices: green

flashing slowly.
NOTICE
i i
For all non-grouped X-zone 5000 within range of the
main device the grouping LED flashes green.
5. Press key briefly and consecutively for all desired group
devices.
X-zone included in group.

Grouping LED group device: lit in green.

6. Press key on the main device briefly.
Search run is terminated.

Grouping LED main device: lit in red-green.

Grouping is completed.

Group monitoring is activated.

7. Deactivate group monitoring provisionally (see chapter
4.2.7 on page 46).
8. Set up devices at the location of use.
Adding X-zone to a group
1. Position the ungrouped X-zone 5000 next to the main
device.
2. Press key on the main device briefly.
Search run for the group devices is started.

Grouping LED main device: red-green flashing slowly.

Grouping LED for potential group devices: green

flashing slowly.
3. Press key on the required group device briefly.
X-zone included in group.

Grouping LED group device: lit in green.

4. Press key on the main device briefly.
Search run is terminated.

Grouping LED main device: lit in red-green.

Grouping is completed.

5. Deactivate group monitoring provisionally (see chapter
4.2.7 on page 46).
6. Set up new group device at the location of use.
Dräger X-zone 5000
Establishing a wireless connection
47