Publicidad
ENGLISH
-
Make sure no packaging materials remain in the toasting slot and no object has fallen
inside the toaster.
Make sure you have read and understood all instructions and warnings in this instruction
-
manual.
-
Pay particular attention to the safety instructions on previous pages.
-
Place the toaster on an even, heat-resistant surface. Do not place the toaster near heat
sources, places with high humidity levels, or combustible materials.
Plug the toaster into an appropriate wall outlet. The plug must be easily accessible to
-
disconnect it quickly in case of an emergency.
-
Clean the toaster (read the "Cleaning and maintenance" section). Run the toaster at
maximum intensity level for at least 2 minutes.
Please note
-
You may notice a slight burning smell or smoke when using the toaster for the first
time, caused by the excess of lubricants from the manufacturing process. Ensure good
ventilation and let the toaster complete a few cycles until no odour or smoke can be
noticed.
After a short cooling down period, your toaster will be ready for use. The operation instructions
are detailed below.
3. OPERATION
Plug the toaster into a power supply and introduce the bread loaves in the toaster's slots.
-
Turn the intensity level knob to the desired position.
-
-
Lower the lever, the toaster will start operating and the Stop button light will turn on.
-
The toaster will eject the bread loaves and will turn automatically off when it has finished
toasting.
Use the extra-lift system to remove the smallest bread pieces.
-
Reheat function
Use this function to reheat cold toast.
-
Introduce the toast in the toaster and lower the lever. Press the reheat button to select
-
this function.
Defrost function
Introduce the toast in the toaster and lower the lever. Press the defrost button to select this
function.
34
TOAST&TASTE EXTRA W
TOAST&TASTE EXTRA B
Stop function
To stop the toasting process at any time, press STOP.
Crumb tray
-
The tray is designed to collect the breadcrumbs at the bottom of the device during the
toasting process.
Press and pull from the crumb tray to take it out. Empty it and then put it back in its position.
-
Pastry holder
When necessary, install the pastry holder on top of the toaster's rack. Select the desired
intensity level and use the lever to start the toasting process.
4. CLEANING AND MAINTENANCE
-
Unplug the toaster from the mains supply and allow it to cool down completely before
disassembling, cleaning, or storing it.
Do not immerse the toaster, cord, or plug in water or any other liquid.
-
-
Do not clean the inside of the toaster, as it may damage the heating elements.
-
Do not use a metal scouring pad, abrasive materials, metal polish, harsh chemical cleaner,
or hard objects to clean any surface of the toaster.
Wipe the outside surfaces of the toaster with a soft cloth or sponge and mild detergent.
-
-
Remove the remaining crumbs after each use.
-
Store the toaster in a clean, dry place when not in use. Make sure the appliance is clean and
dry, and unplugged from the power supply.
It is recommended to store the appliance in its original box, which will protect it from dust.
-
-
When storing the toaster, the power cord must be stored in the space to that purpose on
the bottom of the appliance. Simply wind the power cord around the hooks.
5. TECHNICAL SPECIFICATIONS
Product reference: 02182/02185
Product: Toast&Taste Extra B / Toast&Taste Extra W
Rated power: 1000 W
Voltage and frequency: 220-240 V ~ 50 Hz
Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain
ENGLISH
35
TOAST&TASTE EXTRA W
TOAST&TASTE EXTRA B
Publicidad
