Roger Beep On/Off; Key-Tone On/Off; Channel Selection - Topcom TwinTalker 6800 Manual De Usuario

Topcom Twintalker 6800
b. Sending a call Tone
Press briefly. The call tone will be transmitted for 3 seconds on the set channel.

13.12 Roger Beep On/Off

After the - button is released, the unit will send out a roger beep to confirm that you have
PTT
stopped talking.
To set the Roger Beep.
• Press
• Press
• Press

13.13 Key-Tone On/Off

When a button is pressed, the unit will beep briefly.
To set the key-tone.
• Press
• Press
• Press
13.14 Dual Channel Monitor function
In stand-by, the PMR is set on one set channel with CTCSS code. The PMR will only receive
signals transmitted on that channel and CTCSS code.
Dual Channel Monitor allows you to monitor a second channel with CTCSS code.
• Press
• Press
• Press

CHANNEL SELECTION

• Press
• Press
To disable the function select 'OFF' when setting the channel.
When the Dual Channel Monitor function is activated, the PMR will switch sequentially be-
tween the standby channel + CTCSS and the Dual Channel + CTCSS.
12
5 times. 'ro' will be displayed.
to enable (ON) or
to confirm your selection and return to the standby mode.
PTT
6 times. 'to' will be displayed.
to enable (ON) or
to confirm your selection and return to the standby mode.
PTT
7 times, DCM OFF appears on the display.
or to change the channel.
to confirm the channel selection and go to CTCSS SUB-
or to change the CTCSS.
to confirm.
PTT
disable the Roger-Beep (OF).
disable the Roger-beep (OF).
Topcom Twintalker 6800