Publicidad
Idiomas disponibles
Idiomas disponibles
N2
1. Clean the area around the air filter. Use a damp
cloth or a soft brush.
2. Unscrew and remove the air filter.
3. Wash the air filter with running water to remove
the dirt.
4. Allow the air filter to dry in the air. And then install
it in the housing by thghtening the screw.
Maintenance intervals
It is recommended to lubricate the gearbox and
clean the air filter every 50 hours of operation based
on actual usage.
CLEANING
1. Switch off the brush cutter and remove the
battery.
1. Do not use aggressive detergents or solvents.
Clean the machine after use with a damp cloth
dipped in mild detergent.
2. Keep battery connection free of dirt and debris,
and clean with a soft and dry brush or cloth.
3. Do not spray water onto the motor and electrical
components.
4. Do not use pressure washer to clean your
machine.
STORAGE
O
2
1
1
o
90
1. Remove the battery pack from the brush cutter
before storage.
2. Loosen the clamp bolt until the bike handle can
be moved.
3. Rotate the bike handle 90
and fold it down.
4. Tighten the clamp bolt until the handle cannot be
moved.
5. Store the brush cutter and the battery in a dry
and secure place that is inaccessible to children
and other unauthorized people.
Remove the cutting attachment if it will not be
used for a long time.
6. Store the battery only within a temperature range
o
o
between 5
C (41
F) and 25
example, do not leave the battery in the car in
summer time.
7. Once got wet in the rain during operation, the
machine and the battery should be dried before
storing or charging. Remove the battery and
reinsert it if the machine fails to turn on.
For Battery tools
The recommended ambient temperature range for
discharging is -20
o
C~45
The recommended ambient temperature range for
the charging system during charging is -5
(23°F~113°F).
O
in a clockwise position
o
o
C (77
F). As an
o
C(-4°F~113°F).
o
o
C~45
C
EN
15
Publicidad
