Publicidad
Idiomas disponibles
Idiomas disponibles
EVERY 50 WORK HOURS
PERIODICALLY (6 MONTHS)
AFTER EACH MOWING JOB
Clean and oil the mowing bar blades according to the in-
structions in the chapter entitled: "Cleaning and oiling the
cutters".
CLEANING AND OILING THE CUTTERS
POTENTIAL SHEARING OF THE LIMBS.
POTENTIAL SERIOUS INJURIES.
Mowing bar cleaning and oiling are very dangerous poerations.
Always comply with the following instructions:
Wash the mowing bar with a jet of pressurized water, stan-
ding at least one and a half meters away from the implement;
When the mowing bar is dry, lubricate the cutting blades
with very viscous oil
IMPORTANT: The cutting blades must be cleaned and lubri-
cated every day after work.
CHECKING THE CLEARANCE BETWEEN THE TOOTH AND THE
UPPER BLADE GUIDE
Therefore it is important to restore the coupling properly!
cod. G19503900
DANGER
USE AND MAINTENANCE
Fig.37
Fig. 38
Fig. 39
ENGLISH
Fig. 36
C
H
I
L
N
M
53
Publicidad
