Publicidad
Idiomas disponibles
Idiomas disponibles
must be marked with the letter T directly after the letter which indicates the symbol of impact, i.e. FT, BT or AT. If the letter indicating the
symbol of the impact is not placed directly before the T then the means of protection may be used solely for protection from being hit by
particles moving at a high velocity in the room temperature.
Maintenance and storage: Once work has been concluded, the shield should be cleaned with a soft and wet cloth. Heavy soiling may
be removed with water and soap; dry with a cloth. Do not use any abrasive cleaning agents. Do not use solvents to clean the filter and
the guard. Do not submerge the welding filter in water. The product should be stored in the provided individual packaging in a dark, dry,
ventilated and closed area. During storage do not exceed the range of temperature between -20°C and +70°C. Protect the product from
dust and dirt (using foil bags and others, etc.) Protect the product from mechanical damage. Transport - in the provided individual case, in
cardboard boxes, in closed means of transport.
Table of the recommended protection grades for electric arc welding.
Process
1,5
Covered electrode
MAG
TIG
Heavy metals MIG
Light metals MIG
Arc-air gouging
Plasma cutting
Micro plasma welding
4
1,5
ATTENTION! The term „heavy metals" is used for steel, steel alloys, copper, copper alloys, etc.
O R I G I N A L
6
10
15
30
40
60
8
8
8
9
9
10
10
9
5
6
7
6
10
15
30
40
60
GB
Current strenght [A]
70
100
125
150
175
200
9
10
11
9
10
11
10
11
10
11
11
10
11
8
9
10
11
70
100
125
150
175
200
I N S T R U C T I O N S
225
250
300
350
400
12
13
12
12
13
11
12
13
12
13
12
13
14
12
13
12
225
250
300
350
400
450
500
600
14
13
14
14
14
15
450
500
600
7
Publicidad
