Publicidad
Idiomas disponibles
Idiomas disponibles
MC-5455630-Bedien-1211_a 08.12.11 16:52 Seite 59
6 – Safety instructions
relating specifically to
the equipment
• Use for dry sanding tasks only.
• Do not use in stationary operation.
• Before each use, check the machine
and sanding belt for damages.
• Breathing in sanding dust is
dangerous, for example, when
sanding paint that contains lead or
some varieties of wood, i.e. oak, or
metal dust. Thus, always work with
the dust collection mechanism
attached.
• Do not process materials containing
asbestos.
• Do not bend the sanding belts.
• Never process both wood and metal
with the same belt.
• Wear a dust mask and protective
goggles when sanding.
• We also recommend wearing ear
defenders.
• Secure the piece you are working on
to make sure it cannot slip, for
example, with a vice.
• Only use sanding belts with the
specified dimensions.
Caution! Before changing the
belt, unplug the power cord!
• When working, hold the machine
tightly and guide it with both hands.
• Observe the general safety notes with
regard to operating electrical tools.
• If connection cables are damaged,
they must – in order to reduce the
risks – be replaced by the
manufacturer or by their customer
service representative.
Safety marking
The symbols on the housing mean the
following:
Do not dispose of with
domestic waste!
Important! Observe
operating instructions!
„Tested Safety" voluntary
quality mark
CE Mark (conformity to
European safety standards)
Safety standard mark for
Croatia
Housing is double insulated
7 – Installation and setting
Changing the sanding belt (Figure 3)
Caution! Unplug from the power
source!
Pull the sanding belt tensioning lever (8)
out of the sanding belt guide. This
relaxes the belt and allows it to be
removed from the guide rollers and
replaced with a new one.
59
Publicidad
