Proper installation and placement
If the oven is to be permanently connected to
the power supply:
Ensure that the device is installed only
Z
X
by the customer service, an electrician
or trained personnel with the appropriate
knowledge/education.
Ensure that the device is installed in a way
Z
X
that allows to disconnect it from the power
supply, with a contact opening distance
that ensures complete disconnection in
category III overvoltage conditions.
Ensure that the device is connected
Z
X
directly to the mains socket.
– Ensure that no adapters, no multi-
sockets and no extension cables are
used to connect the device.
Ensure that the device is not exposed to
Z
X
atmospheric agents (rain, sun).
Proper use
Only use the device to prepare and
Z
X
cook food.
Use oven gloves when placing containers
Z
X
in the oven or when taking containers out
of the oven.
Observe the manuals of the cooking
Z
X
devices that are used with the oven when
using the device.
Do not place power cables of other electric
Z
X
appliances on hot parts of the oven.
Do not use the oven chamber to store
Z
X
any objects.
Do not use flammable liquids near
Z
X
the oven.
Only use the temperature probe
Z
X
recommended for this oven.
Risk of overheating and malfunction of the
oven due to blocked ventilation!
Never cover the inside walls of the oven
Z
X
with aluminium foil, especially the lower
part of the oven chamber.
Do not block the ventilation of the fan or
Z
X
the cooling openings above the oven door.
The appliance shall not be installed behind
Z
X
a decorative door in order to
avoid overheating.
Damage to the enamel in the oven due to
wrong handling of pots or containers!
During cooking, never place pots or
Z
X
containers directly on the floor of the oven
chamber.
Place pots and containers only on the
Z
X
racks or enamel trays provided on one
of the five shelves available in the oven
chamber.
Risk of burns!
During use the appliance becomes hot.
Z
X
Care should be taken to avoid touching
heating elements inside the oven.
WARNING: Accessible parts may become
hot during use. Young children should be kept
away.
Risk of burns!
The end of the door handle may be hotter
due to hot air being vented.
When opening or closing the door, always
Z
X
hold the door handle in the middle.
Always make sure that the control knobs
Z
X
are in the off position when the oven is not
in use.
Risk of electric shock due to
damaged device!
Do not switch on a damaged device.
Z
X
Switch off the fuse in the fuse box.
Z
X
Contact the customer service.
Z
X
Risk of electric shock!
Do not touch the device with wet parts of
Z
X
your body.
Do not use the device when barefoot.
Z
X
Do not pull on the device or power cable
Z
X
to unplug it from the socket.
WARNING: Ensure that the appliance is
switched off before replacing the lamp to
avoid the possibility of electric shock.
– 5 –
EN