Wahl 1400 Cordless Manual De Uso Original página 12

E N G L I S H
G Plug-in power supply with plug plate
H Device connector plug
I
Blade guard (for storage)
J
Comb attachment (3 mm, 6 mm, 9 mm, 12 mm)
K Cleaning brush
L Oil for the cutting set
de
Technical data
en
Type
fr
Cutting system
Cutting set width
it
Cutting length
es Drive
Operating mode
pt
Battery type
Battery operating
nl
Charging time battery
Dimensions (L x W x H)
da
Weight
Emission sound pressure level < 70 dB(A) @ 25 cm
sv
Vibration
no
Plug-in power supply
Manufacturer
fi
tr
pl
Type
cs
Input voltage
Input AC frequency
sk
Output voltage
14
Output current
hr
Output power
Average efficiency during
hu
operation
Power consumption
sl
upon zero load
ro
Operating conditions
Environment
bg
The appliance is insulated and suppressed against radio-interference. It
ru
meets the requirements of the EU Electromagnetic Compatibility Directive
2014/30/EU and the Machinery Directive 2006/42/EC.
uk
et
Operation
Preparation
lv
Keep the packaging material for later safe storage or transport.
lt
f Check the completeness of the scope of delivery.
f Check all parts for possible transport damage.
el
f In case of transport damage, contact your dealer.
ar
14
Professional mains /
battery hair clipper
adjustable cutting set
46 mm
0.7 - 3 mm
DC motor
mains / battery (Two Way)
Lithium-ion
time up to 180 minutes
approx. 140 minutes
175 x 50 x 46 mm
approx. 286 g
< 2.5 m/s2
E-TEK Electronics Manufactory Co, LTD
B, 3 Bldg Tangwupu Industrial Park,
Yan-chuan, Songgang Subdistrict, Bao'an
District, 518105 Shenzhen, Guangdong
PEOPLE'S REPUBLIC OF CHINA
ZD018B050200
100-240 V AC
50-60 Hz, 0.8 A
5.0 V
2.0 A
10.0 W
78.7
0.1 W
0°C - +40°C
Safety
Caution! Damage due to incorrect voltage supply.
f Only operate the appliance with the operating voltage
specified on the type plate of the appliance or on the plug-in
power supply.
f Only operate the appliance with the plug-in power supply
appliance supplied.
Charge the battery
1. Use the on/off switch to switch the appliance off (Fig. 2 - 2).
2. Insert the appliance connection plug of the plug-in power supply into
the appliance socket (Fig. 4 - 1).
·
Intelligent charging management prevents overcharging of
the battery.
·
The ideal ambient temperature for charging is between 15 °C
and 35 °C.
3. Plug the plug-in power supply into the mains socket (Fig. 4 - 2).
 The charging process begins.
·
During charging, the battery capacity indicator (E) lights up
red. When the battery is fully charged, the battery capacity
indicator lights up in a constant green.
Battery operation
1. Switch the appliance on with the on/off switch (Fig. 2 - 1).
·
The battery charge level is indicated by the battery capacity
indicator (E):
– LED off = 100 % - 10
red
– LED flashes = 10 % - 0 %
·
When the battery is discharged, the appliance switches off
automatically.
2. Use the on/off switch to switch off the appliance after use (Fig. 2 - 2).
Mains operation
Caution! Damage caused by using the hair clipper
with the plug-in power supply permanently plugged in
(mains operation).
The hair clipper is not intended to be used with a plug-in power
supply permanently plugged in (mains operation). The con-
nection cable of the plug-in power supply is not designed for
mechanical stress in continuous operation.
f Mains operation is only recommended for a short time, in
case of an empty battery.
3. Insert the appliance connection plug of the plug-in power supply into
the appliance socket (Fig. 4 - 1).
4. Plug the plug-in power supply into the mains socket (Fig. 4 - 2).
5. Switch the appliance on with the on/off switch (Fig. 2 - 1).
6. Use the on/off switch to switch the appliance off again after use
(Fig. 2 - 2).
1430-1000 00 - 07-2022