Publicidad
Idiomas disponibles
Idiomas disponibles
3.4. Measurement
•
Before to use this instrument the User guide and Safety warnings must be read
and understood.
Safety procedures and rules for working near high voltage energized systems
•
must be observed during the use of this equipment. The generated voltages and
currents may be dangerous.
1.
Before power-on the equipment, connect the test probes to the item
to be measured and to the front panel terminals, as shown in figure 2
for current up to 10 A or in figure 3, for the 100 A range.
Warning
The clamps in the drawings are only for illustration.
9
Publicidad
