Atlas Copco ETF SL21-04-i06-T25 Instrucciones De Producto página 6

Safety Information
ServAid facilitates the ordering process of spare parts, ser-
vice tools and accessories for the product of your choice. It is
continuously updated with information of new and re-
designed products.
You can use ServAid to present content in a specific lan-
guage, provided that translations are available, and to display
information about obsolete products. ServAid offers an ad-
vanced search functionality of our entire product range.
ServAid is available on DVD and on the web:
http://servaidweb.atlascopco.com
For further information contact your Atlas Copco sales repre-
sentative or e-mail us at:
servaid.support@se.atlascopco.com
Symbols on the tool
The symbols on the tool have the following meanings:
A
B
C
D
Safety Data Sheets MSDS/SDS
The safety data sheets describes chemical products sold by
Atlas Copco.
6
Directive 2006/42/EC on Ma-
chinery specifies the essential
health and safety require-
ments the product has to meet
in order for the manufacturer
to affix the CE marking.
When operating the device be
sure to use caution.
The symbol indicates that
parts within the product must
be handled in accordance
with the WEEE Directive.
Read the instruction manual/
booklet before starting work
or before operating equip-
ment or machinery.
© Atlas Copco Industrial Technique AB - 9836 2718 00
For more information, consult the website
http://www.atlascopco.com/.
Choose Products - Safety Data Sheets, and follow the in-
structions on the page.
Decommissioning
Recycling instruction
When a product has served its purpose it has to be recycled
properly. Dismantle the product and recycle the components
in accordance with local legislation.
Batteries shall be taken care of by your national battery re-
covery organization.
Technical data
Technical data
Noise and vibration emission
Noise (in accordance with
ISO15744)
Sound pressure level
Sound power level
Uncertainty
This equipment is intended for fixtured applications. The
noise emission is given as a guide to the machine-builder.
Noise and vibration emission data for the complete machine
should be given in the instruction manual for the machine.
Noise and Vibration Declaration Statement
These declared values were obtained by laboratory type test-
ing in accordance with the stated standards and are suitable
for comparison with the declared values of other tools tested
in accordance with the same standards. These declared val-
ues are not adequate for use in risk assessments and values
measured in individual work places may be higher. The ac-
tual exposure values and risk of harm experienced by an indi-
vidual user are unique and depend upon the way the user
works, the workpiece and the workstation design, as well
upon the exposure time and the physical condition of the
user.
We, Atlas Copco Industrial Technique AB, cannot be held
liable for the consequences of using the declared values, in-
stead of values reflecting the actual exposure, in an individ-
ual risk assessment in a work place situation over which we
have no control.
This tool may cause hand-arm vibration syndrome if its use
is not adequately managed. An EU guide to managing hand-
arm vibration can be found by accessing
www.pneurop.eu/index.php
lation'.
We recommend a programme of health surveillance to detect
early symptoms which may relate to noise or vibration expo-
sure, so that management procedures can be modified to help
prevent future impairment.
ETF SL21-04-i06-T25
dBA
<70
-
-
http://
and selecting 'Tools' then 'Legis-