elero Junior 1 Instrucciones De Montaje página 49

Installation
4.2 Electrical connection
WARNING
Danger of life-threatening injury due to faulty electrical connection.
Electric shock possible.
• Prior to commissioning, check the type and value of connection voltage.
• For devices with rated voltage 230 V 1 AC, 50 Hz, the correct connection of
the PE conductor must be checked prior to commissioning.
CAUTION
Damage to unit for versions with rated voltage 230 V 1 AC, 50 Hz caused by
faulty electrical connection.
• Do not make connection N to 230 V/50 Hz.
• Simultaneous application of voltage to conductors "R" and "V" is not permit-
ted.
CAUTION
Damage to the device due to faulty electrical connection.
• Take note that the motor, control system and options can have different con-
nection voltages.
CAUTION
Damage to the device due to mishandling.
• On versions with a separate control line, operation must not take place with-
out integration of the limit switches in the control system. Evaluation for the
limit switches must be provided.
CAUTION
Damage to the device due to the use of a non-fitting or unsuitable drive control
unit.
• The control unit must support all the options attached to the device.
• Connect all the marked cable conductors.
• Do not connect any conductors that are neither marked nor stripped.
No circuit diagrams are listed below on account of the multitude of configuration
possibilities.
The device has to be connected in accordance with the circuit diagram enclosed
with the delivery.
17