Publicidad
Idiomas disponibles
Idiomas disponibles
5.4 Confi guration condensate drain
There are three modes of operation:
• CAPACITIVE = Automatic drainign using a capacitive sensor;
• TIMED = programmable draining times;
• CONTINUOUS (external) = if there is an external drain.
set
esc
1. Press
and
together at the same time to enter general menu "PAr" .
set
2. Press
to enter.
to fi nd menu " Cd".
3. Use the arrows
or
set
4. Press
to enter.
to fi nd parameter " d3".
5. Use the arrows
or
set
6. Press
to choose the type of the drain:
0 = external;
1 = timed;
2 = capacitive.
set
7. Press
for fi ve seconds to select the drain.
esc
set
PAr
set
esc
CF9
d3
set
esc
0
For the option (1) timed drain,it is possible to set the ON/OFF time of the drain. On menu " Cd "
1. Use the arrows
or
to fi nd the parameter
set
2. Press
to confi rm.
English
........
Cd
set
esc
d2
d1
2
1
"d1" to set the opening time.
PSE 325-1000 60Hz
3. Use the arrows
or
to fi nd the parameter
set
4. Press
to confi rm.
esc
5. Press
to exit.
5.5 Visualization of temperature probes
On display appear the dew point temperature as defoult.
To view other temperatures, proceed as follows:
1. Use the arrows
or
chosse the sensor.
b0 = dew point temperature sensor;
b2= evaporation temperature sensor;
b5= Suction compressor temperature sensor;
b8 = condensation temperature sensor;
P1 = High pressure sensor
Once chosen wait a few seconds and the probe value will appear.
esc
2. Press
to exit.
b0
set
If you switch OFF the dryer with
, when you switch ON the sensor you chose remains memorized.
If you switch OFF the dryer with the MAIN SWITCH "
the B0 sensor.
" d2 " to set the closing time.
b2
...
0.0
....
&
", when you switch ON returns to reading
6/20
Publicidad
