EGO COMMERCIAL BCX4500 Manual Del Operador página 21

MOUNTING THE GUARD
WARNING:
injury to people, do not operate without
guard in place.
1. Loosen the two bolts in the guard
with the supplied hex key, then
remove the bolts and spring
washers from the guard (Fig. 3a).
2. Lift the cutter head and face it
downward. Align the two mounting
holes in the guard with the two
assembly holes in the base of the
shaft and then secure the guard
onto the shaft base with the two
screws and two spring washers
(Fig. 3b).
NOTICE: There are two kinds of guards
compatible with this machine. the guard
with icon can only be used with the string trimmer head and must not be used
with brusher cutter head. Be careful to choose the correct guard when using the
machine.
NOTICE: The string trimmer guard is not included (EGO AD4500, sold separately).
56-VOLT LITHIUM-ION COMMERCIAL 12" BRUSH CUTTER — BCX4500/BCX4500-FC
To reduce the risk of
3a
3b
21