Publicidad
Idiomas disponibles
Idiomas disponibles
Temperature setting of freezing chamber
Press the Freezer button to change the set point temperature of the freezer. With each
press of the button the temperature will be reduced by 1ºC. The refrigerator
temperature setting range is from -24 to -16ºC. When the temperature is set to -24ºC,
pressing the button again will change the temperature directly to -16ºC.
Mode setting
PowerCool mode
Press and hold the Fridge button for 3 seconds to enter the PowerCool mode. The 3
icon will illuminate and the temperature 2ºC will be displayed. To cancel the
PowerCool mode, press and hold the Fridge button for 3 seconds or make a short
press and the icon will turn off, indicating that the mode has been deactivated. The
setpoint temperature will return to the previous setting. If the Vacation mode is
activated while this mode is active, it will be automatically deactivated.
The PowerFreeze mode is automatically deactivated after 6 hours.
PowerFreeze mode
Press and hold the Freezer button for 3 seconds to enter the PowerFreeze mode. The
4 icon will illuminate and the -24°C temperature will be displayed. To cancel the
PowerFreeze mode, press and hold the Freezer button for 3 seconds or make a short
press and the icon will turn off, indicating that the mode has been deactivated. The
setpoint temperature will return to the previous setting. If the Vacation mode is
activated while this mode is active, it will be automatically deactivated.
The PowerFreeze mode is automatically deactivated after 26 hours.
Vacation mode
Press the Vacation button to set this mode. The 5 icon will illuminate, the refrigerator
temperature display will turn off and the freezer temperature display will show -18ºC.
With the Vacation mode active, press the Vacation button again to deactivate it. Icon 5
will turn off and the refrigerator and freezer set point temperature will return to the
previous setting. If the PowerCool or PowerFreeze mode is activated, the vacation
mode will be automatically deactivated.
Recommended setting: Refrigerator 4°C, freezer -18°C.
Door opening alarm and indicators
When the door is opened, a melody will sound as an indicator, and if the door is not
closed within 2 minutes, an audible alarm will sound until the door is closed. You can
press any button to deactivate this alarm. When the door is opened, the display panel
will light up, as well as the internal lamp.
Error codes
The display may show one of the following codes to indicate an appliance fault.
Although the refrigerator may continue to cool despite displaying these errors, the
user should call for service to ensure optimal operation of the refrigerator.
E1 : Refrigerator temperature sensor fault
E2: Freezer temperature sensor failure
E3: Failure of the temperature sensor in the meat and fish zone
E5: Defrost sensor detection circuit failure
E6: Communication error
E7: Room temperature sensor failure
16
V.1
Publicidad
