Tenveo TEVO-VL12U Manual Del Usuario página 13

6.3 Camera Focusing Mode Control
【AUTO FOCUS】Switch the focus mode to AUTO
【MANUAL FOCUS】Switch the focus mode to MANUAL
【FAR】Far focus manually
【NEAR】Near focus manually
6.4 Camera Zoom Control
Press any one of the 4【ZOOM】to make the zoom functioning. These 4
keys are not applicable for fixed focus cameras.
6.5 Preset Setup, Call, Cancel
( 1) Reserve Preset: Press【PRESET】then press one of the numbers(0-9) to
reserve a preset that correspond to the NUMBER.
Note: you can setup 10 presets at most by the remote control.
(2) Call Preset: Press the NUMBER (0-9) directly to call the reserved preset.
Note: It won't work if there's no preset reserved in the corresponded
number.
(3) Remove Preset: Press【RESET】then press one of the number(0-9) to
remove a preset that corresponds to the NUMBER.
6.6 RS-232 Interface Distribution
6.7 RS-485 Interface Distribution
PIN NUM
A
B
AUTO MANUAL
ZOOM
SLOW
FUNCTION
DTR IN+ (connect to RS-485)
DSR IN-(connect to RS-485)
9
FOCUS
FAR NEAR
PRESET RESET
ZOOM
FAST