Maglite ML150LR7 Manual Del Propietário página 11

Operation - Getting the most out of Your ML150LR
Section 5
Switch Operation
Your Flashlight's Function Sets and the Functions Within
Each Set
The ML150LR™/ML150LRS™ LED flashlight includes powerful new
electronics, providing five different functions to choose from. Because not
all functions are equally important to all users, the ML150LR™/ ML150LRS™
LED flashlight offers an array of USER-CONFIGURABLE FUNCTION SETS
that LET YOU PERSONALIZE the settings for QUICKEST ACCESS to the
FUNCTIONS YOU USE MOST. The four available Function Sets are shown in
the below Function Sets Chart.
Function Sets Chart
1
GENERAL 2
(Default)
Full Power Full Power
Low Power Low Power
Eco Strobe
10
3
LAW
OUTDOOR 4
TACTICAL
ENFORCEMENT
Momentary Momentary
Full Power Full Power
Eco Strobe
/ML150LRS LED Rechargeable Flashlight System
™ ™
The five different functions are: – Full Power, Low Power, Strobe (flashes 12 times
per second), Eco and Momentary On/Off (stays on only while the switch button is
held down). Not all of these functions are equally important to every user. That
is why these functions are organized into four different function sets – so that
you can personalize your flashlight to suit your needs, configuring it for quickest
access to the functions that best match your preference.
How To Choose A Function Within a Set - "Quick Click"
The available function sets, and the functions within each one, are shown in the
Function Sets Chart.
As it comes out of the package, your ML150LR™/ML150LRS™ LED flashlight is
set to the "General (Default)" function set (Function Set #1 in the chart). If you require
only those three functions (Full Power, Low Power and Eco), then you never have
to change it. You can select a function within that set by the "Quick Click" method:
Turn the flashlight on with one Quick Click and it is on at Full Power. Turn it off,
then turn it on with two Quick Clicks (about as fast as you would say "Click Click")
and it turns on at the Low Power function. Turn it off, then turn it on with three
Quick Clicks (about as fast as you would say "Click Click Click") and you have the
Eco function.
Selecting a function within any of the other function sets works the same way –
starting with the flashlight off, invoke the desired function by applying 1, 2 or 3
"Quick Clicks", as the chart shows. For example, if you are in "Outdoor" function
set (Function Set #2) and you want to select the Strobe function, begin with the
flashlight off, apply three Quick Clicks, and your flashlight will strobe.
How To Go From One Function Set To Another
Your ML150LR™/ML150LRS™ LED flashlight's "General (Default)" setting is Function Set #1.
If you want to keep that setting you don't have to do anything. Function Set #1 will always be
in effect unless it is changed. If you want to choose a different function set, follow these
steps: