Descargar Imprimir esta página

Modular EM 70/40 GRL Serie Instalación, Uso, Mantenimiento página 21

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

12. USING THE ELECTRIC GRILL
The appliance is designed for cooking foods placed
on the grilles provided.
The grill must not be used to heat pans or
saucepans.
SWITCHING ON AND OFF
The thermostat control knob has the following
positions:
OFF
MINIMUM TEMPERATURE
MAXIMUM WATER TEMPERATURE
Switching on
- Turn the thermostat knob to the chosen
temperature setting for cooking.
- The yellow indicator light switches on.
- The yellow indicator light switches off when the
oven reaches the set temperature.
Turning off
Turn the thermostat knob to position " 0 ".
The yellow indicator light switches off.
USING THE GREASE COLLECTION TRAY
Pour 2-3 cm of water into the grease collection tray
to facilitate cleaning and obtain optimum cooking
results.
Grease collection tray
Any grease from cooking which drips into the grill
and passes through the brazier is collected in the
grease collection tray. Periodically empty and clean
this tray.
13. USING THE GAS LAVA STONE GRILL
The appliance is designed for cooking foods placed
on the grilles provided.
The grill must not be used to heat pans or
saucepans.
Loading the lava stone
The appliances come complete with 2 packs of lava
stone for each brazier (cooking zone).
Each pack weighs 4 kg.
The lava stones have a min. diameter of 25mm, a
max. diameter of 30mm and a max. length of
50mm, with a +/- 5% tolerance.
Distribute the contents of one pack evenly between
the braziers. Do not under any circumstances use
more lava stone than recommended.
The second pack must only be used to top up the
lava stone originally loaded as the latter is gradually
consumed.
Grease collection tray
Any grease from cooking which drips into the grill
and passes through the brazier is collected in the
grease collection tray. Periodically empty and clean
this tray.
BURNER IGNITION AND EXTINCTION
The gas tap control knob has the following
positions:
OFF
PILOT IGNITION
MIN. FLAME
MAX. FLAME
Pilot ignition
- Press and turn knob to "pilot on".
- Press the knob down fully and light the pilot using
the piezoelectric igniter.
- Hold the knob down for about 20 seconds before
releasing it. If the pilot flame goes out, repeat the
operation.
Main burner ignition
- To light the main burner, turn the knob from "pilot
on" to "max. flame".
- Next, depending on cooking requirements, turn
the knob to any position between "max. flame" and
"min. flame".
Turning off
- To switch the main burner off, turn the knob to
21

Publicidad

loading