Publicidad
Idiomas disponibles
Idiomas disponibles
F
7
6
8
E
Install fan filter
F
The toilet is continuously ventilated to ensure an odor-free bathroom as well as drying out waste.
To protect the fan from dirt and dust resulting from use, there is a filter in the air duct. This filter
is not pre-installed but must be installed on site as shown below. The filter should be cleaned
regularly to maintain its proper functioning.
D
E
To install the fan filter, follow the steps below. A click is heard when the fan is in place. Insert the
power cable through hole in the back of your Villa. Mount the power cable in the fan house.
C
D
B
C
A
B
8
7
A
7
6
8
5
7
4
6
6
5
DRAWN BY
DATE
2022-03-15
-
UNLESS OTHERWISE SPECIFIED:
DEBURR AND BREAK SHARP EDGES
DIMENSIONS ARE IN MILLIMETERS
TOLERANCE: SS-ISO 2768-1 m
5
7
4
6
EN-18
3
5
2
4
Mounting the toilet
IMPORTANT! Connect the power cord to the toilet before mounting it. After mounting, you will
not have access to the back of the toilet where the cable is to be connected.
Villa is constructed to be fixed to the floor and/or to the wall. For maximum stability, both options
can be combined. This option also applies to Villa US/CA.
Floor
To attach the toilet to the floor, use the supplied screw or other screw suitable for the purpose.
There are two intended screw holes in the bottom plate of the toilet, the plastic in the middle of
the hole is removed with a suitable tool.
Wall
To attach the toilet to the wall, use the wall bracket that are included with the product.
F
E
DRAWN BY
DATE
2022-03-15
-
Funnel mounting
UNLESS OTHERWISE SPECIFIED:
MATERIAL:
DEBURR AND BREAK SHARP EDGES
D
DIMENSIONS ARE IN MILLIMETERS
Color:
THIS DRWAWING AND DESIGN IS THE PROPERTY OF SEPARETT AB,
TOLERANCE: SS-ISO 2768-1 m
With Villa Extend, a funnel is included, which leads the solid waste down to the external latrine
VÄRNAMO, SWEDEN. THE DRAWING IS NOT ALLOWED TO BE
Surface structure:
4
3
COPIED OR HANDED OVER TO A THIRD PARTY WITHOUT SEPARETT
container under the floor. To ensure that the funnel sits right, it must be fixed with the supplied
AB:S PERMISSION.
screws. See picture below.
Basic design according to 3D model
3D shape according to -
C
-
APPROVED BY
DRAWN BY
ARTICLE NUMBER:
-
-
TITLE:
sammanställning 2
-
DWG NO.
MATERIAL:
UNLESS OTHERWISE SPECIFIED:
DEBURR AND BREAK SHARP EDGES
-
Color:
DIMENSIONS ARE IN MILLIMETERS
TOLERANCE: SS-ISO 2768-1 m
B
Surface structure:
-
SCALE:1:20
DO NOT SCALE DRAWING
3
5
2
4
A
1
3
2
F
E
D
8
7
6
5
C
THIS DRWAWING AND DESIGN IS THE PROPERTY OF SEPARETT AB,
VÄRNAMO, SWEDEN. THE DRAWING IS NOT ALLOWED TO BE
COPIED OR HANDED OVER TO A THIRD PARTY WITHOUT SEPARETT
Fixering i golv
AB:S PERMISSION.
Basic design according to 3D model
3D shape according to -
-
APPROVED BY
ARTICLE NUMBER:
-
TITLE:
sammanställning 2
-
DWG NO.
B
-
THIS DRWAWING AND DESIGN IS THE PROPERTY OF SEPARETT AB,
-
VÄRNAMO, SWEDEN. THE DRAWING IS NOT ALLOWED TO BE
SCALE:1:20
DO NOT SCALE DRAWING
2
1
A
COPIED OR HANDED OVER TO A THIRD PARTY WITHOUT SEPARETT
AB:S PERMISSION.
Basic design according to 3D model
3D shape according to -
-
DATE
APPROVED BY
ARTICLE NUMBER:
2022-03-15
-
A
TITLE:
sammanställning 2
-
DWG NO.
MATERIAL:
A3
-
Color:
SHEET 1 OF 1
Surface structure:
-
SCALE:1:20
1
3
2
8
7
6
5
EN-19
F
1
E
F
D
E
C
D
4
3
2
B
C
A
Fixering i vägg
A
A
A3
B
SHEET 1 OF 1
A
A
A3
DO NOT SCALE DRAWING
SHEET 1 OF 1
1
4
3
2
1
1
Publicidad
