Separett VILLA 1067 Manual De Usuario E Instalacion página 8

Installation
WARNING!
Before making holes in walls or floors. Ensure that the location for wall penetration
allows for a hole to be made and that the piping meets construction regulations. Keep
in mind that the wall may conceal, for example, electrical wiring, piping, waterproofing,
load-bearing construction.
Electrical and electronic equipment (EEE) contains materials, components and sub-
stances that may be hazardous and present a risk to human health and the environ-
ment. Hence, this EEE-product shall not be discarded together with household waste
but must be collected separately. Please contact your local municipality for informa-
tion on authorized collection points in your area.
IMPORTANT! Always consult your local environmental office to find out what rules
apply in your municipality. Always follow local regulations. Please view our installation
video at www.separett.com
To make sure the toilet stays odor-free, it is required that the fan in the toilet is
constantly running so that it ventilates and can get new air to ventilate out. To achieve
this, the following is required:
1. No other fan/ventilation system affect the same room
2. Ensure that fresh air from the outside enters the room. The air entry point should
be as close to the toilet as possible
Useful tools
Hole-sizes:
Ventilation: 75 mm (2,95")
Urine drain: 32 mm (1,26")
EN-10
Included with the product
Solid waste container
Lid to solid waste container
Cover plate for Ø75 mm pipe
Cover plate for Ø89 mm / 3,5'' US
pipe
Ventilation pipe 40 cm straight
Ø75 mm
Ventilation pipe 40 cm straight
Ø89 mm / 3,5'' US
Connector pipe Ø75 mm
Connector pipe Ø89 mm/3,5" US
Connector pipe straight Ø75 mm
Connecting pipe 90° Ø75 mm
villa villa extend villa us villa ca
1067 1191 1255
2 1
1 1
1 1
1
1 1
1
1 1
1
1 1
1 1
EN-11
1123
2
1
1
1
1
1
2
2