Descargar Imprimir esta página

Medela Invia Vario 18 AC/DC c/i Instrucciones De Uso página 10

Ocultar thumbs Ver también para Invia Vario 18 AC/DC c/i:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 163
Battery operation
XIV
Indicators
During battery operation
During mains operation
Performance of rechargeable battery
Duration of pumping
Charging time (charged up to 100%)
Rechargeable battery is charged when device is plugged in, even during operation.
Testing of rechargeable battery
1. Pull out mains plug
2. Set required vacuum
3. Plug the suction port
4. Switch on the Vario
5. Measure the running time
6. Compare the running time
ok?
NiMH rechargeable battery
Before first use
Operation with
rechargeable
battery
Storage
8
EN
Visual
does not light up
blinks slowly
lights up
does not light up
blinks rapidly
OK, if the above value is reached
not OK
• Repeat the test
• Calibrating the rechargeable battery
Calibrating the rechargeable battery
A
Completely discharge the rechargeable battery
• Disconnect the mains cable
• Switch on the Vario and allow to run until it
comes to a standstill
B
Charge the Vario
• Plug in the main power cord – the rechargeable
battery is being charged
• Wait until the charging indicator goes out
* Only charge the rechargeable battery when the acoustic signal
sounds and the charging indicator blinks slowly
* Battery should be fully discharged and recharged two
times a week
In order to keep the self-discharge at a minimum, store the Vario and the
replacement rechargeable batteries at temperatures below 25°C (77°F).
Acoustic
rechargeable battery is fully charged
rechargeable battery soon empty
rechargeable battery is being charged
rechargeable battery is fully charged
rechargeable battery is defective
30–45 mins.
~ 5 hrs.
-55 kPa or -413mmHg
> 30 mins.
Repeat this
process
once
The Vario is
then ready
for use

Publicidad

loading